GENERAL FEATURES
In the following sections you can see the entire tables by scrolling them to the right and to the left
POS. | DESCRIPTION | MATERIALS | SPARES | |||
1 | Body | ASTM A234 WPB | ASTM A420 WPL6 | ASTM WP 403 F316 | ASTM A234 WP5 | |
1.2 | Flange | ASTM A105 | ASTM A350 LF2 | ASTM A182 F316 | ASTM A182 F5 | |
1.3 | Guide rods | S.S. 304 | S.S. 304 | S.S. 304 | S.S. 304 | |
2 | Blind flange | ASTM A105 | ASTM A350 LF2 | ASTM A182 F316 | ASTM A182 F5 | |
3 | *Basket | S.S. 304 | S.S. 304 | S.S. 304 | S.S. 304 | X |
4 | Gasket | SS316/Graph. | SS316/Graph. | SS316/Graph. | SS316/Graph. | X |
5 | Stud Bolts | ASTM A193 B7 | ASTM A320 L7 | ASTM A320 L7 | ASTM A193 B7 | |
6 | Nuts | ASTM A194 2H | ASTM A194 Gr.4 | ASTM A194 Gr.4 | ASTM A194 2H | |
7 | Plug | ASTM A105 | ASTM A350 LF2 | ASTM A182 F316 | ASTM A182 F5 |
OTHER MATERIALS AND DIMENSIONS ON REQUEST
* BASKET TYPE: V - W - WW - Z. Basket configuration depend of % ratio requested by customer
CONNECTIONS
Buttweld ANSI B16.25
Flanged ANSI B16.5
STRAINER DESCRIPTION
Designed according to ANSI B16.34 the strainer bodies are produced with a superior wallthickness for corrosion allowance. Standard stainers are equipped with screens for the average service of most mediums ( steam, gas, air, oil, chemicals , ect. ). The large screen open area ensures an efficent filtering action with a low pressure drop. Filtering area to inlet area ratio is larger than 3 to 1 . Screens area manufactured with perforated plate in the materials and with the perforation specified in the relevant tables . Screens with different perforation ( or wire mesh ) and materials may be manufactured on request.
SIZES / DIMENSIONS
Size (inches) | 3” | 8” | 14” |
S | 172 | 356 | 558 |
S (RJ) | 522 | 1004 | 1098 |
H | 340 | 642 | 695 |
H1 | 549 | 1083 | 1568 |
HOW TO SERVICE
Strainer maintenace should be made at least once year, or whenever the pressure drop is found to be in excess of the normal figures. A quick clean-up system, to made approximately once a mounth. For a complete maintenance follow the points herebelow:
- Be sure that the main line has been shut-off
- Untighten cover stud bolts (5) and nuts (6) and remove cover [ blind flange ] (2) and gasket (4)
- Withdraw basket (3) an carefully inspect it for damages. If any hole in the screen is found abstructed, clean it with compressed air and / or any suitable tool. If the basket is broken in any part or out of shape, replace it with a new spare one.
- Carefully clean the inside of the strainer body
- Fit a new gasket (4)
- Install the new screen or the cleaned one (3)
- Put in place cover (2)
- Slowly give pressure to the line, checking for leakages
- Write on the strainer body the date of this maintenance operation