GENERAL FEATURES
In the following sections you can see the entire tables by scrolling them to the right and to the left
| POS. | DESCRIPTION | MATERIALS | SPARES | |
| 1 | Body | ASTM A216 WCB | Astm A351 CF8M | |
| 2 | Bonnet | ASTM A105 | Astm A182 F316 | |
| 3 | Screen | SS 304 | SS 316 | X |
| 4 | Gasket | SS 304 | A182 F316 | X |
| 5 | Stud Bolts | ASTM A193 B7 | ASTM A320 L7 | |
| 6 | Nuts | ASTM A194 2H | A194 Gr.4 | |
| 7 | Drain Plug | A105 | S.S. 316 | |
| 8 | Disk Joint | ASTM A105 | A182 F316 | |
| 9 | Retain ring | ASTM A182 F6 | A182 F6 | |
| 10 | Ring | ASTM A182 F6 | A182 F6 | |
|
OTHER MATERIALS ON REQUEST |
||||
CONNECTIONS
Buttweld ASME B 16.25
Flanged ASME B 16.5
LIMITING CONDITIONS
According to the body rating (ANSI B 16.34)
C1500 – ANSI 1500. OTHER RATING ON REQUEST
C1500 – ANSI 1500. OTHER RATING ON REQUEST
STRAINER'S DESCRIPTION
Designed to ANSI B16.34 the strainer bodies are produced with a superior wallthickness for corrosion allowance. Standard strainers are equipped with screens for the average service of most mediums ( steam, gas, air, oil, chemicals , etc. ). The large screen open area ensures an efficient filtering action with a low pressure drop. Filtering area to inlet area ratio is larger than 3 to 1 . Screens area manufactured with perforated plate in the materials and with the perforation specified in the relevant tables . Screens with different perforation ( or wire mesh ) and materials may be manufactured on request.
